Savin SDC103A Service Manual download pdf (Page 533)

100

101

3.7 STAPLER UNIT

The stapler motor [A] drives the staple hammer [B] via the gears [C] and the

eccentric cam [D].

The roller [E] feeds the sheets to be stapled under the hammer.

When the aligned copies are brought to the staple position by the grip unit,

the stapler motor starts rotating and the copies are stapled. When the cam

completes one rotation, the staple home position sensor [F] is deactuated

and the stapler motor stops.

When the stapler paper sensor [G] in the grip assembly does not detect any

copies under the hammer, the stapler motor does not rotate.

When the trailing edge of the last staple sheet pass through the staple end

sensor [H], the sorter stapler enters the staple near end condition. After the

current job is completed, the Add Staples indicator lights on the operation

panel. Then the copier cannot be used whenever the staple mode is

selected.

[F]

[A]

[D]

[C]

[B]

[H]

[G]

[E]

BASIC OPERATION

A166/A187/A189 9-14 SM

CÓPIA NÃO CONTROLADA

1 2 ... 528 529 530 531 532 533 534 535 536 537 538 ... 622 623

Comments to this Manuals

No comments

Savin SDC103A Service Manual Page 533

Comments to this Manuals

Related products and manuals for Multifunctionals Savin SDC103A