Savin SDC103A Service Manual download pdf (Page 101)

100

101

3.4 COLOR CCD

The color CCD converts light reflected from the original into three analog

signals, one for each of the three basic colors Red, Green, and Blue. The

signals are called the R, G, and B signals. Each of the four scans (for toner

colors BkCMY) uses all three signals (RGB).

The CCD consists of three lines of 5000 elements at a resolution of 400 dpi

(15.7 dots/mm). To make the R, G, and B signals, each line has a color

separation filter (R, G, or B).

The lines are spaced 8 pixels apart for full size magnification. To correct for

these spacings, the R, G, and B signals must be synchronized. This is done

by delay memories in the scanner IPU board (refer to the Image Processing

section).

The CCD is mounted on the board with the lens block (the assembly is

known as the SBU: Sensor Board Unit). Therefore, to replace the CCD,

replace the SBU.

SCANNER UNIT

A166/A187/A189 2-32 SM

CÓPIA NÃO CONTROLADA

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 622 623

Comments to this Manuals

No comments

Savin SDC103A Service Manual Page 101

Comments to this Manuals

Related products and manuals for Multifunctionals Savin SDC103A