Savin SDC103A Service Manual download pdf (Page 249)

100

101

76. Check whether the copy image registration is within the specification or

not as shown in the following procedure.

(1) Enter SP5-955 and select pattern number 25.

(2) Press the Interrupt key. Select the A3/11" x 17" or A4/8

1/2

" x 11"

(sideways) paper tray. Press the Start key. The copier prints out the

test pattern as shown in the diagram.

(3) Check whether the copy image registration in the main scanning direction

and the sub scanning direction are within the specifications shown below.

Main scanning direction:

10.0 ± 2.0 mm (0.393" ± 0.078")

Sub scanning direction:

10.0 ± 2.0 mm (0.393" ± 0.078")

If the copy image registration is out of specification, adjust it as shown

in the procedure in section 5 of the service manual: "Copy image

registration adjustment".

(4) Reset pattern number 25 to "0".

NOTE: After step 76, be sure to input "0" as the setting for SP5-955.

Otherwise, the test chart will be output whenever the user tries to

make copies.

Rev. 11/96

Copy image registration test pattern

COPIER INSTALLATION

A166/A187/A189 3-34 SM

CÓPIA NÃO CONTROLADA

1 2 ... 244 245 246 247 248 249 250 251 252 253 254 ... 622 623

Comments to this Manuals

No comments

Savin SDC103A Service Manual Page 249

Comments to this Manuals

Related products and manuals for Multifunctionals Savin SDC103A