Savin SDC103A Service Manual download pdf (Page 400)

100

101

8.8 PAPER FEED ROLLER (SEMICIRCULAR ROLLER)

REPLACEMENT

1. Remove the front cover, the inner cover, and the used toner tank (see

procedures 1.2, 1.9 and 1.10).

2. Remove the paper feed tray (see procedure 8.7).

3. Remove the paper feed roller shaft holder [A] (1 screw).

4. Pull out the paper feed roller shaft [B].

5. Replace the 4 paper feed rollers [C].

NOTE: 1) Do not touch the paper feed rollers directly. This is to avoid

staining the roller’s surface with skin oils.

2) Be sure to orient the paper feed rollers correctly. Otherwise

the rollers will not align with the holes on the shaft.

3) The middle two rollers are made of plastic. Handle them with

care.

4) Ensure the pin [D] fits properly into the notch at the end of the

paper feed roller shaft. Install the paper feed roller shaft with

the flat side of the rollers facing down.

5) The paper feed roller shaft has three paper feed roller

mounting holes for each roller. The middle mounting hole is

the normal (factory) setting; the first for A size paper, and the

third for B size paper. The holes for A and B sizes can be

used as alternate holes when a paper jam occurs.

For example, the B size hole is used for DLT Jams.

[D]

[A]

[B]

[C]

Replacement

and

Adjustment

PAPER FEED AND REGISTRATION

SM 5-67 A166/A187/A189

CÓPIA NÃO CONTROLADA

1 2 ... 395 396 397 398 399 400 401 402 403 404 405 ... 622 623

Comments to this Manuals

No comments

Savin SDC103A Service Manual Page 400

Comments to this Manuals

Related products and manuals for Multifunctionals Savin SDC103A