25. Enter SP mode as follows:
1) Press the
#
key.
2) Enter "107" using the numeric keys.
3) Hold down the
$
key for more than 3 seconds.
NOTE: When SP mode is selected, "1" blinks in the 3rd digit of the copy
counter, the Auto Image Density indicator starts blinking, and the
reduce/enlarge indicator turns off.
26. Perform the "TD sensor initial setting" SP mode as follows:
1) Enter "2" and press the
%
key.
2) Enter "214" and press the
%
key.
3) Press the
!
key.
NOTE: The machine will automatically stop when TD sensor initial
setting is completed. (It takes about 2.5 minutes.)
Then perform the "Compulsory toner supply" SP mode as follows:
1) Press the
#
key twice.
2) Enter "2" and press the
%
key.
3) Enter "207" and press the
%
key.
4) Press the
!
key.
NOTE: The machine will automatically stop when compulsory toner
supply is completed. (It takes about 30 seconds.)
5) Compulsory toner supply must be performed twice in order to supply
enough toner to the toner hopper, so press the
!
key again.
27. Press the
#
key three times to exit SP mode.
A212I509.wmf
A212/A214
Copier
SM 5-33 A212/A214
Comments to this Manuals