Savin 2027 Operations Instructions download pdf (Page 34)

Troubleshooting

The Machine Does Not Print

Possible Cause Solutions

Is the power on? Check the cable is securely plugged into the power outlet and the

machine.

Turn on the main power switch.

Is the machine online? If not, press [f

fOnline] on the display panel.

Does the printer function

status indicator stay red?

If so, check the error message on the display panel and take re-

quired action.

Is there a warning status or

error message on the dis-

play panel?

If so, check the error message or warning status on the display

panel and take the required action.

Can you print a configura-

tion page?

If you cannot print a configuration page, there maybe a machine

malfunction. Contact your sales or service representative.

See p.42 “Printing the configuration page” for printing a configu-

ration page.

Is the interface cable con-

nected securely to the ma-

chine and computer?

Connect the interface cable securely. If it has a fastener, fasten that

securely as well.

See “Connecting the Machine”, Printer Reference 1.

Are you using the correct

interface cable?

The type of interface cable you should use depends on the compu-

ter. Be sure to use the correct one. If the cable is damaged or worn,

replace it.

See “Connecting the Machine”, Printer Reference 1.

Was the interface cable

connected after the ma-

chine was turned on?

Connect the interface cable before turning on the machine.

Is the signal status satisfac-

tory when using wireless

LAN in infrastructure

mode ?

To check signal status, press {

{{

{User Tools/Counter}

}}

} on the display

panel, and then press [System Settings] on the display panel. On the

[Interface Settings] tab, select [IEEE 802.11b], and then press [Wireless

LAN Signal]. If signal quality is poor, move the machine to a loca-

tion where radio waves can pass or remove objects that might

cause interference.

Note

❒ You can check signal status only when using wireless LAN in

infrastructure mode.

When using wireless LAN,

is the SSID correctly set?

Check using the machine's display panel that the SSID is correctly

set.

See “Interface Settings/IEEE 802.11b (Option)”, General Settings

Guide.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 77 78

Comments to this Manuals

No comments

Savin 2027 Operations Instructions Page 34

Comments to this Manuals

Related products and manuals for Laser/LED printers Savin 2027