Savin 2027 Operations Instructions download pdf (Page 29)

4. Troubleshooting

Error & Status Messages on the Display

Panel

This section describes the principal messages that appear on the panel display.

If a message not described here appears, act according to the message.

Reference

Before turning the main power off, see ‘Turning On the Power’, General Set-

tings Guide.

❖

❖❖

❖ Status messages

❖

❖❖

❖ Alert messages

Message Status

Hex Dump Mode In Hex Dump mode, the machine receives data in hexadecimal

format. Turn off the machine after printing, and then turn back

on.

Offline The machine is offline. To start printing, switch the machine

online by pressing [Offline] on the display panel.

Please wait. The machine is preparing the development unit. Wait a while.

Printing... The machine is printing. Wait a while.

Ready This is the default ready message. The machine is ready for

use. No action is required.

Resetting job... The machine is resetting the print job. Wait until “Ready” ap-

pears on the display panel.

Waiting... The machine is waiting for the next data to print. Wait a while.

Messages/Second messages Causes Solutions

Cannot connect with the

wireless card.

The IEEE 802.11b card may

have come off, or an error may

have occurred in the IEEE

802.11b card.

Turn off the main power

switch, and check the card is

installed correctly. If the mes-

sage appears again, contact

your sales or service repre-

sentative.

Close duplex unit cover. The cover of the duplex unit is

open.

Close the cover of the duplex

unit.

Collate has been cancelled. The collate print function has

been canceled.

Turn off the main power

switch, and back on again. If

the message appears again,

contact your sales or service

representative.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 77 78

Comments to this Manuals

No comments

Savin 2027 Operations Instructions Page 29

Comments to this Manuals

Related products and manuals for Laser/LED printers Savin 2027