Savin 2027 Operations Instructions download pdf (Page 26)

Sample Print/Locked Print

22

3

Form Feed

This section gives instructions for op-

erating the machine when there is no

tray for the selected paper size or

type, or when paper loaded in the

machine has run out.

Limitation

❒ The tray cannot be changed if the

following functions are set for it:

• Staple

• Duplex Print to a tray that does

not support duplex printing

• Cover Sheet

• Front/Back Covers

• Slip Sheets

• Chaptering

Note

❒ If form feed is selected for a tray

with the following settings, you

can change the tray by canceling

the settings:

• Staple

❒ If Auto Continue is selected, form

fed paper is printed after a set in-

terval. See p.46 “System”.

If the machine does not have a tray for

the selected paper size or paper type,

or if the selected paper loaded in the

machine has run out, a caution mes-

sage appears.

If this message appears, do one of the

following:

Print Using a Selected Tray

A

AA

A

Select the tray for form feed from

those that appear on the display

panel.

If you want to print after adding

paper to the tray, select the tray af-

ter loading the correct paper.

Note

❒ To load paper in the bypass

tray, see "Setting Paper on the

Bypass Tray", Printer Reference

1.

B

BB

B

Press [Continue].

The machine prints using the se-

lected tray.

Note

❒ If a tray with a smaller paper

size is selected, the print job

may be cut short, or other prob-

lems may occur.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 77 78

Comments to this Manuals

No comments