Savin 5450 User Manual Page 185

  • Download
  • Add to my manuals
  • Print
  • Page
    / 230
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 184
165
4. What To Do If Something
Goes Wrong
If Your Machine Does Not Operate As You
Want
If a malfunction or a misfeed occurs within the machine, the following messages
will appear on the panel display.
Message Meaning
Drum unit is not set.
Set Drum unit.
Make sure that the drum is completely set in position.
Max. quantity: **** The number of prints exceeds the maximum print
quantity.
You can change the maximum number of prints that
can be made in one operation with the user tools. See
“Max. Quantity” in
P.136 “2. Set Operation Modes”.
Min. quantity: **** The number of prints does not exceed the minimum
print quantity.
You can change the minimum number of prints that
can be made in one operation with the user tools. See
“Min. Quantity” in
P.136 “2. Set Operation Modes”.
Set original.
Set command sheet.
Make prints after you confirm whether there is an
original or a command sheet on the exposure glass
(contact glass).
Make sure that you have changed the original on the
exposure glass (contact glass) before pressing the
{
Start
}
key.
Size of original and paper is
not same.
Set a paper size that matches the reproduction ratio
you have selected and your original.
The reproduction ratio selected by Auto Magnifica-
tion Selection mode is too big or too small.
Note
You can make prints if you press the
{
Start
}
key.
Page view 184
1 2 ... 180 181 182 183 184 185 186 187 188 189 190 ... 229 230

Comments to this Manuals

No comments