Savin 9022 Operations Instructions download pdf (Page 4)

cRIO-9022 Operating Instructions and Specifications 4 ni.com

Complete the following steps to install the controller on the chassis.

1. Make sure that no power is connected to the controller or the chassis.

2. Align the controller with the chassis as shown in Figure 3.

Figure 3. Installing the Controller on the Chassis (Eight-Slot Chassis Shown)

3. Slide the controller onto the chassis connector. Press firmly to ensure

the chassis connector and the controller connector are mated.

4. Using a number 2 Phillips screwdriver, tighten the two captive screws

on the front of the controller to 1.3 N · m (11.5 lb · in.) of torque.

1 Controller

2 Captive Screws

3 Chassis Connector

4 Reconfigurable Embedded Chassis

NI cRIO-9022

CompactRIO Real-Time Controller

DO NOT SEPARATE CONNECTORS

WHEN ENERGIZED IN

HAZARDOUS LOCATIONS

SAFE MODE

CONSOLE OUT

IP RESET

NO APP

USER1

1: POWER

2: FPGA

3: STATUS

4: USER1

INPUT

9-35 V

35 W MAX

OFF

10/100

ACT/LINK

10/100/1000

1 2 3 4

RESET

1 2 3 4 5 6 7 8 9 ... 22 23

No comments

Savin 9022 Operations Instructions Page 4