Savin 4700WD Operations Instructions download pdf (Page 73)

143

5. Remarks

Do's and Don'ts

CAUTION:

Important

❒ Only disconnect the power cord after checking that all copies are finished.

• Do not touch areas on or around the fusing unit. These areas get hot.

• After making copies continuously, the exposure glass may feel warm to

the touch. This is not a malfunction.

• Make sure the machine is well ventilated when in use. If the machine is op-

erated for a long time in a poorly ventilated location, it may begin to smell.

We recommend that you use the machine in a well ventilated room to en-

sure you maintain the operating conditions.

• You might feel warm around the ventilation hole. This is caused by ex-

haust air, and not a malfunction.

• Do not turn off the operation switch while copying or printing. When turning

off the operation switch, make sure that copying or printing is completed.

• Do not open the covers of machine while copying or printing. If you do,

misfeeds might occur.

• Do not drop staples, paper clips, or other object in to the machine.

• Do not stand or sit on the machine.

• Do not leave the paper path section open for more than 10 minutes.

• Do not touch the photosensitive conductor. If you touch it by accident,

wipe it gently with a soft cloth.

• If you will not be using the machine for a long time, remove the paper from

the paper roll tray and place it in its storage bag.

• The machine might fail to produce good copy images if there should occur

condensation inside caused by temperature change. To prevent such trou-

ble, this machine has an anti-condensation function. Even after the main

power switch is in the stand-by position, the anti-condensation heater is

active, thus keeping the machine body slightly warm.

• The machine has a Anti-humidity function. Even when the main power switch

is in the Off position, the Anti-humidity heater is active if it is turned on.

• Do not move the machine while copying or printing.

• Be sure to take a note of your machine settings. If you operate the machine im-

properly or a failure occurs in the machine, your machine settings might be lost.

• Supplier shall not be liable for any loss or damages resulting form a failure

on the machine, loss of machine settings, and use of the machine.

• Unplug the power cord from the wall outlet before you move the equipment.

While moving the equipment, you should take care that the power cord will

not be damaged under the equipment.

DolphinGB-Copy-F_V4_FM.book Page 143 Monday, June 11, 2001 5:02 PM

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 93 94

No comments

Savin 4700WD Operations Instructions Page 73