Savin 4800WD Specifications download pdf (Page 144)

RW-480 PLOTCLIENT LPR

1. Open the Prompt on the Windows computer of RW-480

PLOTBASE.

2. Change to the folder containing the files to be printed.

3. Enter the following command:

lpr –S %computer name% –P WINPRINT –o l <filename>

-S = server name

-P = name of the enabled plotter

-o l = binary mode

If you send a file without print parameters to RW-480

PLOTBASE, the RW-480 PLOTBASE basic settings are used. If

you want to send your own print parameters with the plot, you

have to first send the CFG file, which must have the same name

as the graphic file, and then send the graphic file itself!

Attention: Always send the CFG or SSL file with your

print parameters first, then send the graphic file. Oth-

erwise there is a risk that RW-480 PLOTBASE begins to

print your file before it has received your own print pa-

rameters for the print (CFG or SSL file).

Configuration on UNIX

1. Install the "General Network Services" – TCP/IP.

2. Then install the "BSD Print Spooling System". For SuSE>=

V6.4 "LPROLD from Network Support"; TCP/IP, UUCP, Mail,

News. If you use another UNIX operating system please re-

fer to the corresponding manual!

3. Go to the folder "C:\ Program Files\ RW-480\ RW-480\

PLOTBASE\ TOOLS\ PLOTCLIENT_LPR" on the Windows

computer of RW-480 PLOTBASE and copy the file "print-

cap_sample" to UNIX as the file "/etc/printcap".

4. Adjust this file "/etc/printcap" to your network environment.

The end of the file should include more or less the follow-

ing:

RW-480 CLIENTS 144

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 152 153

No comments

Savin 4800WD Specifications Page 144