Savin 2513f Operations Instructions download pdf (Page 66)

NetWare Configuration

NetWare 4.x, 5 - Advanced Settings

The actual procedures for configuring the machine vary depending on whether

the Network Interface Board is configured as a print server or as a remote print-

er. This section describes how to configure it in the NetWare 4.x, 5 environment.

❖

❖❖

❖ To use NetWare 5

• You cannot use the NDPS (Novell Distributed Print Services) mode.

• If you use Pure IP, configure the machine to use the TCP/IP protocol. For

more information about how to make the settings, see the System Settings.

Preparation

The following procedures use the Property Sheet method in configuring the

Network Interface Board. If you configure the Network Interface Board as a

NetWare print server for the first time, we recommend you use the Wizard

method. ⇒ P.43 “Quick Setup Using the NIB Setup Tool Wizard”

Note

❒ This section assumes NetWare is functional and that the necessary environ-

ment for the NetWare Print Service is available.

❒ You should install the client software released from Novell in Windows be-

fore running the NIB Setup Tool for configuring in NDS mode or using Win-

dows NT 4.0.

Install the NIB Setup Tool

Print Server Remote Printer

Basic Procedure

Configure the Network Interface Board

Configure the NetWare

Turn the power

off and on

Start the print server

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 111 112

No comments

Savin 2513f Operations Instructions Page 66