Operating InstructionsCopy ReferenceRead this manual carefully before you use this product and keep it handy for futurereference.For safety, please fo
vii3.TroubleshootingIf Your Machine Does Not Operate as You Want... 153General ...
Duplex892AAAAPress the [Dup./Combine/Series] key.BBBBPress the [1Sided] key for "Origi-nal", and then press the [2Sided]key for "Copy&q
Copying902BBBBPress the [2Sided] key for "Origi-nal", and then press the [2Sided]key for "Copy".Note❒ To change the copy orientati
Combine912CombineYou can combine two or more origi-nals into one copy. 1 Sided Combinemode is for 1-sided copies, and 2 Sid-ed Combine mode for 2-side
Copying922❒ If the direction of originals is dif-ferent from that of the copy paper,the machine will automatically ro-tate the image by 90° to make co
Combine932AAAAPress the [Dup./Combine/Series] key.BBBBPress the [1Sided] key for "Origi-nal", and then press the [Combine 1Side] key for &qu
Copying942CCCCPress the [4 Originals] key, andthen press the [OK] key.DDDDSelect the paper.EEEEPlace your originals, and thenpress the{{{{Start}}}}key
Combine952CCCCPress the [8 Originals] key, andthen press the [OK] key.DDDDSelect the paper.EEEEPlace your originals, and thenpress the{{{{Start}}}}key
Copying962CCCCPress the [4 Originals] key, andthen press the [OK] key.DDDDCheck the orientation.Note❒ To change the copy orientationto "Top to Bo
Combine972BBBBPress the [1Sided] key for "Origi-nal", and then press the [Combine 2Side] key for "Copy".CCCCPress the [8 Originals
Copying982BBBBPress the [1Sided] key for "Origi-nal", and then press the [Combine 2Side] key for "Copy".CCCCPress the [16 Original
viiiEdit1/2... 194Edit2/2...
Combine992CCCCPress the [2 Pages] key, and thenpress the [OK] key.DDDDCheck the orientation.Note❒ To change the copy orientationto "Top to Bottom
Copying1002CCCCPress the [4 Pages] key, and thenpress the [OK] key.DDDDCheck the orientation.Note❒ To change the copy orientationto "Top to Botto
Combine1012CCCCPress the [8 Pages] key, and thenpress the [OK] key.DDDDCheck the orientation.Note❒ To change the copy orientationto "Top to Botto
Copying1022CCCCPress the [4 Pages] key, and thenpress the [OK] key.DDDDCheck the orientation.Note❒ To change the copy orientationto "Top to Botto
Combine1032BBBBPress the [2Sided] key for "Origi-nal", and then press the [Combine 2Side] key for "Copy".CCCCPress the [8 Pages] k
Copying1042BBBBPress the [2Sided] key for "Origi-nal", and then press the [Combine 2Side] key for "Copy".CCCCPress the [16 Pages]
Series/Book1052Series/BookSeries copies are made by separatelycopying the front and back of a 2-sid-ed original or the two facing pages ofa spread ori
Copying1062AAAAPress the [Dup./Combine/Series] key.BBBBPress the [Series/Book] key.CCCCMake sure that the [Series] key isselected.DDDDPress the [Book→
Series/Book1072❖❖❖❖Inch versionAAAAPress the [Dup./Combine/Series] key.BBBBPress the [Series/Book] key.CCCCMake sure that the [Series] key isselected.
Copying1082Note❒ See the following table for originaland copy paper sizes when using a100% ratio.❖❖❖❖Metric version❖❖❖❖Inch versionAAAAPress the [Dup.
1Machine TypesThis machine comes in two models which vary by copy speed. To make surewhich model you have, see the inside front cover.Type 1 Type 2Cop
Series/Book1092Copying Book OriginalsLimitation❒ You cannot use the bypass traywith this function.❒ The function might not work forcertain types of la
Copying1102Howtofoldcopiestomakeabooklet1: Open to Left2: Open to RightAAAAPress the [Dup./Combine/Series] key.BBBBPress the [Series/Book] key.CCCCPre
Series/Book1112❖❖❖❖Open to RightImportant❒ Before selecting this function, se-lect"Opentoleft"or"Opentoright" with the User Tools.
Copying1122GGGGPlace your originals, and thenpress the{{{{Start}}}}key.Note❒ When placing originals on theexposure glass or in the docu-ment feeder in
Series/Book1132BBBBPress the [Series/Book] key.CCCCPress the [Book] key.DDDDPress the [1Sided→→→→Magazine] key,and then press the [OK] key.EEEEPress t
Copying1142How to fold and assemble copies tomake a magazine❖❖❖❖Open to Left❖❖❖❖Open to RightAAAAPress the [Dup./Combine/Series] key.BBBBPress the [Se
Edit Image1152Edit ImageImage RepeatThe original image is copied repeat-edly.Note❒ The number of repeated imagesdepends on the original size, copypape
Copying1162GGGGPlace your original, and thenpress the{{{{Start}}}}key.Double CopiesOne original image is copied twice onone copy as shown in the illus
Edit Image1172CenteringYou can make copies with the imagemoved to the center of the copy pa-per.Limitation❒ You cannot use the bypass traywith this fu
Copying1182GGGGPlace your originals, and thenpress the{{{{Start}}}}key.Positive/NegativeIf your original is black and white,copy images are inverted.A
2What You Can Do with This Machine (CopyMode)Note❒ The reference of each function is on the next page of this illustration.*3Positive/Negative*1
Erase1192EraseThis function erases the centerand/or all four sides of the originalimage. This is useful for avoidingshadows on the copy image causedby
Copying1202Border EraseThis function erases the edge mar-gins.Youcansetthesamemarginwidthforallfoursides,oryoucansetdifferent margin widths for each s
Erase1212BBBBPress the key for the borderyouwishtochangeandsetanerase border width with the[nnnn] and [oooo] keys.Note❒ To change the value entered,pr
Copying1222Center/Border EraseThis mode erases both the center andedge margins. You can set the samemargin width for all four sides andcenter, or you
Erase1232Selecting [Diff. Width]AAAAPress the [Diff. Width] key.BBBBPress the key for the part youwish to change, and then set anerase margin width wi
Copying1242Margin AdjustmentYou can shift the image to the left,right, top or bottom to make a bind-ing margin.Limitation❒ If you set the margin too w
Margin Adjustment1252CCCCSet a binding margin for a frontpage. Press the [←←←←] and [→→→→] keyswhen setting the left and rightmargins, and the [↓↓↓↓]
Copying1262StampThis function prints stamps on copies.Stamp modes are as follows:❖❖❖❖Background NumberingThis function prints numbers onthe background
Stamp1272DDDDEnter the number to start count-ing from with the number keys,and then press the [OK] key.Note❒ The number can be set from 1 to999.❒ To c
Copying1282❒ You can choose the default settingsfor the language, position, size anddensity of the stamp with the UserTools. ⇒ "Stamp Language&qu
3Series/BookDocument ServerFront & Back1 Sided & Booklet2 Sided & Booklet1 Sided & Magazine2 Sided & Magazine*2 *2*1*1*1*1*1*1*1*4
Stamp1292FFFFChange the stamp position, sizeor density.If you do not wish to make achange, go to stepG.To change the stamp position,size or densityAAA
Copying1302❒ The relationship between the di-rection in which you place theoriginal and stamp orienta-tion/position is as follows.❒ You can move the s
Stamp1312EEEEPress the [All Pages] or [1st Page on-ly] key to select the print page.To change the stamp positionAAAAPress the [Change] key.BBBBSelect
Copying1322EEEEPress the [User Stamp] key.FFFFPress the [Program/Delete Stamp]key.To program the User StampAAAAPress the [Program] key.BBBBPress the s
Stamp1332FFFFPress the [Vertical] key, andthen enter the vertical size inthe same way as stepEEEE.GGGGPlace the user stamp on the ex-posure glass, and
Copying1342❒ You can change the Date Stampsettings with the User Tools. ⇒p.201 “Date Stamp”❒ The font and size of the DateStamp can be changed with th
Stamp1352CCCCPress the [Date Stamp] key.DDDDPress the [All Pages] or [1st Page on-ly] key to select the print page.To change the style of dateAAAAPres
Copying1362Page NumberingUse this function to print page num-bers on your copies.There are six types of Page Number-ing (n is the total number of page
Stamp1372❒ If you combine this function withthe Duplex (Top to Top) functionand select the "P1, P2" or "1/n,2/n" style, the page n
Copying1382BBBBPress the [Stamp] key.CCCCPress the [Page Numbering] key.DDDDSelect the format.EEEETo change the stamp position,press the left [Change]
41. “Selecting Original Type Setting”⇒⇒⇒⇒ p.402. “Adjusting Copy Image Density”⇒⇒⇒⇒ p.383. “Placing Special Originals” ⇒⇒⇒⇒p.344. “Image Repeat” ⇒⇒⇒⇒
Stamp1392CCCCPress the [Numbering from/to]key, and then enter the numberfrom which to start numberingwith the number keys.DDDDPress the{{{{#}}}}key.EE
Copying1402EEEEPress the [Last Number] key, andthen enter the page number atwhich to stop numbering withthe number keys.If you do not wish to change t
Stamp1412EEEEPress the [Numbering from/to]key, and then enter the pagenumber from which to startnumbering with the numberkeys.FFFFPress the{{{{#}}}}ke
Copying1422Cover/Slip SheetUsing this function, you can add cov-er sheets or designate certain pages tobe copied on slip sheets.There are four types o
Cover/Slip Sheet1432❒ In "Cover" of the User Tools (Sys-tem Settings), if you selected"Mode Selected" for the "Tray Dis-play&
Copying1442Front/Back CoversThe first and last pages of your origi-nals are copied on specific papersheets for covers.❖❖❖❖Copy❖❖❖❖BlankNote❒ You can s
Cover/Slip Sheet1452CCCCSelect [Copy] or [Blank] for the cov-er sheets.DDDDSelect the paper tray containingthe non-cover sheet paper, andthen press th
Copying1462AAAAPress the [Cover/Slip Sheet] key.BBBBPress the [Desig./Chapter] key.CCCCPress the key to select the chapternumber.DDDDEnter the page lo
Cover/Slip Sheet1472ChapterThepagelocationsyouspecifywiththis function will appear on the frontof copy sheets.PreparationBefore selecting this functio
Copying1482FFFFWhen you finish specifying thepage locations, press the [OK] key.This display shows example set-tings.Note❒ To change the number entere
5GuideToComponents1. Exposure glass cover (option) orDocument feeder (ADF) (option)Lower the exposure glass cover overoriginals placed on the exposure
Slip Sheets1492Slip SheetsEvery time the originals' page chang-es, a slip sheet is inserted. This func-tion can be used to insert a slip sheetaut
Copying1502BBBBPress the [Slip sheet] key.CCCCSelect [Copy] or [Blank],andthenpress the [OK] key.DDDDSelect the paper tray containingthe non-slip shee
Storing Originals in the Document Server1512Storing Originals in the Document ServerThe optional HDD is required to use this function.The Document Ser
Copying1522Combination ChartThe combination chart given below shows which modes can be used together.When you read the chart, see the following table.
610. Remove Paper IndicatorThe indicator is lit when paper is outputto the internal tray 2 (1 bin tray). Whenpaper is removed from the internal tray 2
7Options1. 500-Sheet FinisherSorts, stacks and staples the copies.2. Bridge unitRelays copies to the finisher.3. Exposure glass coverLower this cover
8Control Panel1. Screen Contrast knobAdjusts the brightness of the display panel.2. IndicatorsThese indicators show the status of themachine or indica
IntroductionThis manual contains detailed instructions on the operation and maintenance of this machine. To getmaximum versatility from this machine a
913.{{{{Start}}}}keyPress to start copying. Press to start scan-ning and printing in Document Servermode.14.{{{{Clear/Stop}}}}key• ClearPress to delet
10Display PanelThe display panel shows the status of the machine, error messages and functionmenus.Important❒ Do not apply a strong shock or force of
117. Shows the available functions.Press a function name to display itsmenu. For example, press the [Re-duce/Enlarge] key to bring up the Re-duce/Enla
12Function List Based on OptionsThe functions that are available to you depend on your machine configurationand which options you have. See the table
13*1Set the paper of the same sizeKLin the paper trays.*2You can use this function when "Rotate Sort" is selected in "Select Stack Func
151. BasicsTurning On the PowerTo turn the machine on, press the op-eration switch.Note❒ This machine automatically entersEnergy Saver mode or turns i
Basics161Turning On the PowerAAAAPress the operation switch. TheOn indicator goes on.The display panel will come on.Note❒ If the power is not turned o
Changing Modes171Changing ModesYou can use this machine not only as a copier, but also as a fax, printer, docu-ment server and scanner as well. Press
Basics181OriginalsSizes and Weights of Recommended Originals❖❖❖❖Metric version❖❖❖❖Inch versionNote❒ The number of originals that can be placed in the
In accordance with IEC 60417, this machine uses the following symbols for the main power switch:aaaa means POWER ON.cccc means STAND BY.
Originals191Non-recommended originals for the document feederPlacing the following types of originals in the document feeder can cause papermisfeeds o
Basics201Sizes Detectable by the Auto Paper Select❖❖❖❖Metric version*1You can select from 81/2" × 13",81/4" × 13" or 8" × 13&
Originals211Missing Image Area❖❖❖❖Exposure glass❖❖❖❖Document feederLimitation❒ Even if you correctly place originals in the document feeder or on the
Basics221Copy PaperRecommended Paper Sizes and TypesThe following limitations apply to each tray:TrayTypePaper Type andWeightMetric Version Inch Versi
Copy Paper231*1Set the paper size selector to thepmark, and then select the paper size in SystemSettings. ⇒ "Paper Size Setting" in the Syst
Basics241*4Place the paper in the bypass tray, and specify the paper size. ⇒ p.63 “When copyingonto custom size paper”When paper larger than 433mm is
Copy Paper251❒ Ifyouloadpaperofthesamesizeinthesamedirectionintwoormoretrays,the machine automatically shifts to the other tray when the first tray in
Basics261Non-recommended PaperRCAUTION:Important❒ Donotuseanyofthefollowingkindsofpaperorafaultmightoccur.• Thermal fax paper• Art paper• Aluminum foi
Toner271TonerHandling TonerImportant❒ If you use toner other than the recommended type, a fault might occur.ReferenceIf you want to add toner. ⇒ p.162
Basics281
iSafety InformationWhen using your equipment, the following safety precautions should always befollowed.Safety During OperationIn this manual, the fol
292. CopyingBasic ProcedureAAAAMake sure that the machine is inCopy mode.If the machine is not in Copymode, press the{{{{Copy}}}}key.BBBBWhen the mach
Copying302----System ResetThe machine returns to its initial con-dition automatically when your job isfinished, after a certain period oftime. This fu
Placing Originals312Placing OriginalsLimitation❒ Place originals after correction flu-id and ink have completely dried.Not taking this precaution coul
Copying322Placing Originals in theDocument FeederNote❒ The last page should be on the bot-tom.❒ Do not stack originals beyond thelimit mark on the sid
Placing Originals332Original OrientationYou can set the original orientation inthe following ways.This function is useful for copyingtorn originals or
Copying342Placing Special OriginalsUse this function when you want touse Batch mode, SADF mode, MixedSize mode, or when you select theoriginal orienta
Placing Originals352SADF modeInSADFmode,evenwhenanorigi-nalisplacedpagebypageinthedoc-ument feeder (ADF), each page isautomatically fed when placed.No
Copying362❒ The sizes of the originals that canbe placed together with this func-tion are as follows:❒ Copying speed and scanning speedwill be reduced
Placing Originals372CCCCEnter the horizontal size of theoriginal with the Number keys,and then press the [#] key.Note❒ If you make a mistake, press th
Copying382Basic FunctionsThe following basic functions are ex-plained in this section.❖❖❖❖Adjusting Copy Image DensityAuto and Manual Image Density❖❖❖
iiRCAUTION:•Protect the equipment from dampness or wet weather, such as rain, snow,and so on.•Unplug the power cord from the wall outlet before you mo
Basic Functions392Auto Image DensityAAAAMake sure that the [Auto Image Den-sity] key is selected.Note❒ If the [Auto Image Density] key isnot selected,
Copying402Selecting Original Type SettingSelect one of the following types tomatch your originals:❖❖❖❖TextSelect this mode when your origi-nals contai
Basic Functions412Selecting Copy PaperThere are two ways to select copy paper:❖❖❖❖Auto Paper SelectThe machine selects a suitable size of copy paper a
Copying422Auto Paper SelectAAAAMake sure that the [Auto Paper Select] key is selected.If the [Auto Paper Select] key is not selected, press the [Auto
Basic Functions432----Rotated copyIf the direction in which your original is placed (LorK) is different from thatof the paper you are copying onto, th
Copying442Auto Reduce/EnlargeThe machine can choose an appropri-ate reproduction ratio based on thepaper and original sizes you select.Limitation❒ You
Sort/Stack/Staple452Sort/Stack/StapleThe machine can scan your originals into memory and automatically sort thecopies.❖❖❖❖Sort• Sort• Rotate Sort• Shi
Copying462*1250 sheets when the optional bridge unit is installed.*2125 sheets when the optional bridge unit is installed.*3To place paper of sizes 10
Sort/Stack/Staple472SortCopies can be assembled as sets in se-quential order.❖❖❖❖SortCopies are assembled as sets in se-quential order.Note❒ The paper
Copying482Note❒ The paper sizes that can be usedin the Sort function are as fol-lows.*1To place paper of sizes 71/4" ×101/2"K,8"× 10&qu
iiiHow to Read this ManualSymbolsIn this manual, the following symbols are used:RWARNING:This symbol indicates a potentially hazardous situation that
Sort/Stack/Staple492CCCCPlace your originals, and thenpress the{{{{Start}}}}key.When placing a stack of originalsin the document feederAAAAPlace a sta
Copying502ReferenceFor the maximum tray capacity ofthe optional finishers ⇒ p.223“500-Sheet Finisher (Option)”, ⇒p.224 “1000-Sheet Finisher (Op-tion)”
Sort/Stack/Staple512StapleAn optional finisher and the bridge unit are required to use this function.Each copy set can be stapled together.Limitation❒
Copying522*1To load paper of sizes 71/4" × 101/2"L,8"× 10"KL, 11" × 15"L, 10" × 14"L,and10" × 15"L,
Sort/Stack/Staple532❖❖❖❖500-sheet FinisherWhen your machine is equipped with the 500-sheet finisher, the stapling po-sition will be fixed to "Top
Copying542*1Not available for paper size larger than A4.Note❒ You cannot change stapling positions during copying.❒ When the original image is rotated
Sort/Stack/Staple552❖❖❖❖1000-Sheet FinisherNote❒ When you select the stapling position, Sort mode is automatically selected.Reference⇒ p.52 “Stapling
Copying562To Stop Scanning TemporarilyWhen you are using the Sort, Stack, orStaple function, the originals arescanned into memory.AAAAPress the{{{{Cle
Copying from the Paper Tray 2572Copying from the Paper Tray 2Usethepapertray2forcopyingontospecial paper (OHP transparencies,label paper (adhesive lab
Copying582❒ Some kinds of envelopes mightcause misfeeds and wrinkles. Inthis case, push down the greenlever of the fusing unit. ⇒ p.65“When copying on
ivTABLE OF CONTENTSMachine Types... 1What You Can Do with Thi
Copying from the Paper Tray 2592BBBBPress the [Vertical inch] key, en-ter the vertical size of the paperwith the number keys, andthen press the{{{{#}}
Copying602AAAASelect paper type in "Specialpaper".BBBBPress the [OK] key.CCCCSet your originals and press the{{{{Start}}}}key.Important❒ Whe
Copying from the Bypass Tray612Copying from the Bypass TrayThe optional bypass tray is required to use this function.Use the bypass tray to copy onto
Copying622BBBBPush up the paper guide releaselever.1: Paper guide release leverCCCCLightly insert the copy paper facedown and adjust the paper guide.T
Copying from the Bypass Tray632CCCCSelect the paper size.Note❒ The copy paper sizes that canbe selected are as follows:• A3L,B4L,A4KL,A5KL,A6L,B5KL,B6
Copying642EEEETo register the custom size en-tered, press the [Program] keyandthenpressthe[Exit] key.Note❒ If you do not register the cus-tom size, go
Copying from the Bypass Tray652FFFFPress the [OK] key.GGGGPlace your originals, and thenpress the{{{{Start}}}}key.Important❒ When copying onto OHPtran
Copying662EEEEIf the duplex unit is installed,close the duplex unit.FFFFPress the{{{{#}}}}key.GGGGSelect the paper size, and thenselect [Thick Paper]
Programs672ProgramsYou can store frequently used copyjob settings in machine memory andrecall them for future use.❖❖❖❖Storing Your SettingsYou can sto
Copying682EEEEEnter the program name with theletter keys on the display panel.Note❒ If you do not wish to enter theprogram name, go to stepF.❒ You can
v2.CopyingBasic Procedure ... 29Placing Originals ...
Programs692Deleting a ProgramAAAAPress the{{{{Program}}}}key.BBBBPress the [Delete] key.CCCCPress the program number youwant to delete.DDDDPress the [
Copying702Job PresetThe optional HDD is required to use this function.If a long copy job is in progress andyou do not wish to wait for it to finish,yo
Other Functions712Other FunctionsEnergy Saver ModeIf you do not operate the machine fora certain period after copying orwhen you press the{{{{Energy S
Copying722GGGGPress the{{{{Start}}}}key.Note❒ The previous copy job settingswill be restored and the ma-chine will continue copyingfrom where it left
Other Functions732Changing the Number of SetsYou can change the number of copysets during copying.Limitation❒ This function can be used onlywhen the S
Copying742Preset Reduce/EnlargeYou can select a preset ratio for copy-ing.Note❒ The reproduction ratios that youcan specify are 25-400% (25-200%when p
Preset Reduce/Enlarge752❖❖❖❖Inch versionAAAAPress the [Reduce/Enlarge] key.Note❒ To select a preset ratio on the in-itial display, press the shortcutr
Copying762Create Margin ModeUse "Create Margin" to reduce the im-age to 93% of its original size with thecenter as reference. You can regist
Zoom772ZoomYou can change the reproduction ra-tio in 1% steps.Note❒ The reproduction ratios that youcan specify are 25-400% (25-200%when placing origi
Copying782To enter the ratio with the numberkeysAAAAPress the [Mag. Ratio] key.BBBBEnter the desired ratio with thenumber keys.Note❒ To change the rat
viDuplex... 881 Sided → 2 Sided ...
Size Magnification792Size MagnificationThis function calculates an enlarge-ment or reduction ratio based uponthe lengths of the original and copy.Prep
Copying802EEEEEnter the length of the copy withthe number keys, and then pressthe [#] key.Note❒ To change the length entered,press the [Clear] or {{{{
Directional Magnification (%)812Directional Magnification (%)Copies can be reduced or enlarged atdifferent reproduction ratios horizon-tally and verti
Copying822DDDDEnter the desired ratio with thenumber keys, followed by the[#] key.EEEEPress the [OK] key.To specify a ratio with the [nnnn]and [oooo]
Directional Size Magnification (Inch)832Directional Size Magnification (Inch)The suitable reproduction ratios willbe automatically selected when youen
Copying842EEEEEnter the horizontal size of thecopy with the number keys, andthen press the [#] key.FFFFEnter the vertical size of the origi-nal with t
Duplex/Combine/Series852Duplex/Combine/SeriesYou can make copies in a variety offormats by combining the followingmodes:• 1Sided/2Sidedoriginals• 1 Si
Copying862Original Direction andCompleted CopiesThe resulting copy image will differaccording to the direction in whichyou place your original (widthw
Duplex/Combine/Series872BBBBPress the [Orientation] key.CCCCSelect an original orientation anda copy orientation.DDDDPress the [OK] key.
Copying882DuplexThe optional Duplex unit is required to use this function.Thisfunctioncanbeusedintwoways:❖❖❖❖1Sided→→→→2SidedThis mode makes two-sided
Comments to this Manuals